Independent lamp guides for Australian homes.

Bedside lamps · Australian buying guide

Best touch bedside lamps in Australia

Choose a touch bedside lamp around what you do in bed. A directional lamp is a useful starting point for reading, a rechargeable lamp removes the bedside cable, and a smart lamp can offer a separate low-light mode. Check the lowest setting and what happens when you switch it back on before buying.

A shaded bedside lamp with an animated touch controlEasy to reach. Easy to dim.

This is a research-based shortlist using manufacturer specifications and manuals. LampScout has not physically tested these lamps. Brightness memory, touch sensitivity and page illumination need checking on the exact model you buy.

As an Amazon Associate, LampScout earns from qualifying purchases. Amazon buttons below open labelled searches, where models, sellers and availability may vary.

Warm shaded bedside lamp on a walnut table beside ivory bedding
Illustrative AI-generated bedroom scene. The lamp pictured is not one of the products compared below.

Three different bedside routines

Start with the light you actually need.

The touch switch is only one part of the decision. A broad glowing lamp and an adjustable reading lamp can both have touch controls, yet put their light in very different places. Choose the beam first, then compare the controls.

The options below cover three useful formats. They are not ranked by a test score. Each has a reason to investigate it and a specific detail to check with the seller.

Illustration of a reading lamp format; not a product photograph

Directional reading

Brilliant Jerico

Flexible neck and base controls. Check that its low setting and beam work at your reading position.

See the reading option ↓
Illustration of a cordless lamp format; not a product photograph

Rechargeable bedside

Zafferano Poldina Pro

Top touch control with a charging base. Confirm the exact version's startup brightness.

See the cordless option ↓
Illustration of a smart lamp format; not a product photograph

Smart room glow

Mi Bedside Lamp 2

Touch slider and a specified night mode. Check regional supply and how the modes are reached.

See the smart option ↓
Published features, with the bedside checks still to make.
LampControl formatLight source & powerBefore choosing it
Brilliant JericoBase touch switch; three dimming stagesIntegrated LED; USB cable includedReading coverage, low setting and included power equipment
Poldina ProTop touch sensor; hold to dimIntegrated LED; rechargeable with contact baseStartup brightness and the manual for the specific version
Mi Bedside Lamp 2Touch slider and control panelIntegrated LED; check supplied regional adapterNight-mode access, app compatibility and local support

Sources: Brilliant Jerico specification, Zafferano Poldina Pro specification and Xiaomi Australia product page. Check the listing's model and included accessories against these sources.

A practical starting point

Which format fits your bedside?

Pick the routine that matters most. The finder uses the differences explained in this guide. It does not rate product quality or predict how a lamp will perform in your bedroom.

If two needs conflict, such as cordless power and a very dim startup, check both before ordering. A lamp that suits one requirement can still be awkward for the other.

Compare the lamp with your normal bedside routine.

For a soft room glow, compare a smart bedside lamp with a shaded touch lamp. Check bulb compatibility if a replaceable globe matters.

Read the relevant checks ↓
01 / Directional reading

Brilliant Jerico

The Brilliant Jerico has a flexible neck, touch controls on the base and three dimming stages. Brilliant lists a 3 W integrated warm-white LED, 150 lm output and a height of 40 cm. A detachable USB cable is included.

Its adjustable head makes it a format to investigate for reading. Aim it at the page from your normal position. Check whether the head can stay below your eye line without the base getting in the way.

Three levels do not tell you how dim the lowest level is. Ask for a demonstration, and confirm the power equipment supplied with the exact offer. Do not assume the USB cable means the lamp has a battery.

Flexible neckThree-stage dimmingIntegrated LED
Search Jerico on Amazon AU

Search results may include different models or no matching offer.

Illustration of a reading lamp format; not a product photograph
Reading-lamp format illustration, not a Jerico product photograph.
Illustration of a cordless lamp format; not a product photograph
Rechargeable table-lamp format illustration, not a Poldina product photograph.
02 / Cordless use

Zafferano Poldina Pro

Poldina Pro puts the touch sensor on top of the shade and recharges on a contact base. The manufacturer's current American specification lists a 38 cm height and selectable 2200 K, 2700 K and 3000 K light, with 234, 251 and 256 lm respectively. Regional packages need checking.

The top control can suit someone who finds a small base switch difficult to locate. Check its height from bed: a control that looks accessible on a dining table can be harder to reach beside a tall mattress.

The LD0340-4 manual linked by Zafferano says light intensity returns to 100% when switched on. It describes storing colour temperature separately. Ask for the manual for your exact version if low-light startup matters.

A charging base also needs a place in your routine. Decide where you will charge the lamp and whether moving it there is convenient.

Top touch sensorContact charging baseVersion-specific startup
Search Poldina on Amazon AU

Confirm the lamp version, charging base and Australian power supply.

03 / Smart room glow

Mi Bedside Lamp 2

Xiaomi's Australian product page describes a touch slider for brightness and a control panel for switching modes. It lists up to 400 lm and a 2 lm minimum in nightlight mode, with a colour-temperature range of 1700 K to 6500 K.

The lamp is worth investigating if you want a broad glow and smart controls. Its diffuser spreads light around the lamp, so compare it with a directional head if the main job is lighting a book.

The lowest published output is tied to nightlight mode. Confirm how you enter that mode and what happens when you turn the lamp on using the slider. Also check the exact regional model, adapter and current app support before buying.

Touch sliderSeparate night modeIntegrated LED
Search Mi Bedside Lamp 2 on Amazon AU

A regional product page does not confirm stock at a particular seller.

Illustration of a smart lamp format; not a product photograph
Smart bedside-lamp format illustration, not a Xiaomi product photograph.

The setting after lights out

Low brightness matters. So does switching it on.

Look beyond the word "dimmable". Ask whether the lamp steps through fixed levels or adjusts gradually, and whether it can start at the setting you used last.

A three-stage touch lamp may cycle through its levels before switching off. A lamp with a hold-to-dim control may use a separate gesture for power. Neither description tells you what the first light will look like after an evening at a low setting.

Brightness memory and colour memory are different features. Ask about both, including what happens after the lamp is unplugged or recharged. Request a short demonstration: dim the lamp, turn it off, turn it back on, then disconnect and reconnect its power according to the manual.

For night use, also check the control itself. A small indicator can be visible from the pillow even when the main light is off. View the lamp from both sides of the bed.

Conceptual three-level touch lamp demonstrationConcept illustration; no measured light levels

Medium illustrative setting

This demonstration uses illustrative levels. It is not a simulation of any shortlisted lamp or a brightness-memory test.

Published maximum light output: Jerico 150 lumens, Poldina Pro 256 lumens at 3000 kelvin, Mi Bedside Lamp 2 400 lumensPublished light output (lm)0100200300400JericoPoldina ProMi Bedside 2150256*400*Poldina Pro at 3000 K; regional specification.

Manufacturer figures: Brilliant, Zafferano America and Xiaomi Australia. Maximum output is not a quality score, a minimum-dimming comparison or a measurement at your book.

Read the number in context

More lumens do not settle the choice.

Lumens describe a light source's output. They do not tell you how much light reaches a page after distance, direction and a shade have affected it. A lower-output directional lamp can put useful light on a book while a glowing diffuser spreads its output through the room.

The graph compares published output, with the relevant Poldina colour setting identified. It does not establish that one lamp will be better for reading. Check the page from your actual seated position.

Colour temperature is a separate choice. A warm-coloured lamp can still be too bright beside a pillow. Australian Energy Rating guidance explains output, colour temperature and dimmer compatibility, and distinguishes ambient lighting from task lighting.

Fit it around the bed

Leave the touch control within reach.

Measure the usable tabletop, including the things that stay there overnight. The shade can be wider than the base, so record both dimensions. Leave room for a water glass without putting it against the control or charging equipment.

Sit in bed before choosing the lamp's position. Reach towards the intended control area while staying in your normal posture. If you need to lean past the table or lift your arm over a tall shade, a base control may suit you better.

For reading, move the lamp until the page is evenly lit and the bright source is outside your direct view. Check the other pillow too. A glowing shade can be pleasant from the chair and intrusive from bed.

Conceptual bedside layout with light aimed at a book

Direct the useful beam onto the page. Check glare from your normal reading position and from the other side of the bed.

Conceptual placement diagram, not a photometric measurement.

Hand reaching to a bronze lamp base on a bedside table
Illustrative AI-generated reach detail. Check the actual control area and operating instructions on your lamp.
Replaceable bulb and integrated LED illustrated side by sideReplaceable globeIntegrated LED

A removable globe and a built-in LED require different checks. Follow the lamp's instructions for either format.

The globe is part of the control system

Check LED compatibility before buying a classic touch lamp.

A lamp with a replaceable globe gives you a choice of light colour and output, within the fitting's limits. That choice is useful only if the globe is compatible with its touch dimmer. Matching the screw or bayonet cap is not enough.

Ask the seller for compatible LED globe models and the lamp's maximum permitted wattage. Energy Rating warns that LED lamps and dimming systems are not universally compatible. A "dimmable" label alone does not establish that a globe will work with a particular touch controller.

All three shortlisted lamps use integrated LEDs. Before purchase, ask what happens if the light source or driver fails, and whether the supplier provides repair or replacement parts.

If you want a smart globe, check the lamp instructions before combining it with a touch dimmer. Do not assume the two control systems can operate together. A simple compatible on/off fitting may be the more practical route.

What your finger changes

How does a touch bedside lamp work?

Many touch controls detect a change in capacitance when a finger contacts the sensor area. Microchip's capacitive-touch application note explains how a controller compares the changed measurement with its untouched baseline.

The lamp's electronics then interpret the contact as an instruction. The instruction might be on/off, the next brightness level or a longer dimming adjustment. The control sequence depends on the lamp, so follow its manual.

A product described as "touch" may use a sensor pad, a conductive body or another activation method. Check the intended area instead of assuming every part of the lamp responds. If pressing is necessary, check how much force it takes and whether the base moves.

For someone who prefers clear physical feedback, a mechanical switch may be easier to use. Try the control with the hand and position you will actually use at night.

A finger near a touch sensor, with a signal going to a controllerControllerTouch area

Simplified capacitive-touch diagram. It does not describe every lamp's circuit.

Before checkout

Check the exact offer.

Marketplace titles sometimes group several lamp sizes or generations together. Match the model number to its manual, then check the package contents. A supplied cable, adapter and charging base are different items.

For mains-powered equipment, confirm the Australian supply arrangement and applicable compliance marking. EESS explains the Regulatory Compliance Mark and its role for in-scope electrical equipment. A travel adapter does not establish compliance or local product support.

For a rechargeable lamp, follow the manufacturer's charging instructions. The ACCC recommends a compatible manufacturer-supplied or recommended charger, disconnecting after a full charge and avoiding charging on bedding. CSIRO's battery-safety report also discusses charger suitability and replacing damaged cables with manufacturer-specified ones.

Ask how returns work if the lowest setting or control behaviour does not suit you. Keep the packaging while you check the lamp in its intended position.

A short buying checklist

0 of 6 checks complete. Nothing is saved or sent.

Bedside questions

Touch lamp FAQs

Are touch bedside lamps good for reading?

They can be, when the beam reaches the page comfortably and the controls are accessible. Touch operation itself does not improve reading light. Compare an adjustable head with a glowing shade at your usual reading position.

Do touch lamps remember their brightness?

Some do, but memory needs checking on the exact model. Ask whether the lamp remembers brightness, colour temperature or both, and whether the behaviour changes after power is disconnected. The word "memory" alone is not specific enough.

Can I use an LED bulb in a touch lamp?

Use an LED globe only when the lamp and globe are compatible. Check the cap, permitted wattage and touch-dimmer requirements in the lamp instructions. A dimmable LED label does not guarantee compatibility with every controller.

Is a USB touch lamp rechargeable?

Only if it has a battery and the manufacturer identifies a charging function. A USB connection can simply supply power while the cable is attached. Check the battery and runtime specification instead of inferring portability from the connector.

Why is my touch lamp flickering or not responding?

Check the external setup and the manual first. A replaceable globe may be incompatible with the controller; a powered lamp may have a cable or supply problem. Disconnect power before any permitted globe change. Stop using damaged equipment and contact the supplier for faults that these checks do not resolve.

Which touch lamp should I choose for a shared bedroom?

Prioritise comfortable low light and predictable startup behaviour. Check the bright source and indicators from both pillows. If one person reads, a directional beam may be easier to position than a broad room glow.

Does a very warm light colour mean the lamp is dim?

No. Colour temperature and light output are separate specifications. A warm-coloured lamp can still be bright. Check the minimum output, how the dimmer works and the light reaching your pillow.

Specifications & supporting evidence

Read the sources behind the comparison.

  1. Brilliant: Jerico black desk lamp. Touch dimming, output, height and supplied USB cable.
  2. Xiaomi Australia: Mi Bedside Lamp 2. Touch control and output by mode.
  3. Zafferano America: Poldina Pro. Regional product specification.
  4. Zafferano: LD0340-4 instruction manual. Startup brightness and colour-setting procedure.
  5. Australian Energy Rating: choosing the right lamp. Lighting terms and dimmer compatibility.
  6. Microchip: self-capacitance measurement. Technical explanation of capacitive touch sensing.
  7. EESS: Regulatory Compliance Mark. Australian in-scope electrical equipment marking.
  8. ACCC: lithium-ion batteries guide. Consumer charging guidance.
  9. CSIRO: lithium-ion battery safety. Research report commissioned by the ACCC.

Compare a lamp's controls with your real bedside routine before choosing it. Read the exact listing and manual, including the first brightness level and supplied power equipment.

Browse touch lamps on Amazon AU

Explore more LampScout lamp guides.