Independent lamp guides for Australian homes.

Bedside lighting · Australian homes

How many lumens for a bedside lamp?

For reading with a conventional shaded bedside lamp, a dimmable bulb around 470 to 800 lumens is a useful place to start shopping. Check it with your book in its usual position, then adjust the brightness. A gentle bedside glow can use less output; a directional reading light may need fewer lumens because it concentrates light on the page.

These are LampScout shopping starting points, not an Australian lighting standard or a promise of reading comfort.

Illustration of a shaded lamp lighting a book; brightness is not a measurement

Light the book. Adjust for the room.

As an Amazon Associate, LampScout earns from qualifying purchases. All Amazon links on this page open Amazon Australia searches with our affiliate tag. Exact model availability has not been confirmed. Check the model, seller and supplied power equipment.

This guide uses government guidance, original research and published specifications. LampScout has not measured these lamps or tested them in a bedroom.

Warm shaded bedside lamp beside an open book on a walnut table
AI-generated bedroom illustration. It does not show a named product or measured brightness.

Answer first

Start with the job your lamp will do.

A bedside lamp can provide a soft background glow, light a book, or do both at different times. Those jobs call for different settings. A large number on the box is useful only when the lamp can put that light where you need it.

Use the examples below to narrow a shopping search, then check the result at home. The 245, 470 and 800 lumen figures come from Energy Rating's replacement-bulb table. Their bedside uses here are LampScout's practical suggestions.

245 lumens is a shopping example, not measured page illuminance245 lm

A softer room glow

Compare a lower-output bulb when the lamp mainly adds atmosphere. Choose dimming if you want a smaller glow later in the evening. This output alone does not establish whether a book will be easy to read.

470 lumens is a shopping example, not measured page illuminance470 lm

A modest reading starting point

Try this class of dimmable bulb in a light shade with the book reasonably close to the lamp. If the page is dim, check the beam direction and shade before buying more output.

800 lumens is a shopping example, not measured page illuminance800 lm

More output to adjust

A dimmable bulb in this class gives a conventional lamp more output to work with. A low setting matters when the same lamp also provides evening atmosphere. Check that the shade shields the bulb from view.

If you already like the brightness of your old bulb, its lumen output is the most useful starting point. Keep the shade and lamp position the same while comparing the replacement. Change one part of the setup at a time so you can tell what helped.

If a product gives only watts, look for its lumen specification or ask the seller. Integrated lamps may state fixture output, while a replaceable globe states bulb output before your separate shade affects it.

Read the label

Lumens, lux, watts and kelvin answer different questions.

Lumens describe visible light output. Lux describes how much light arrives on a surface, such as your book. A lamp can have a substantial lumen output while only a small part of it reaches the page.

NIST defines one lux as one lumen per square metre. Converting a lamp's lumens into page lux requires knowing how much light reaches the page and how it is distributed. The label alone does not supply that information.

Watts describe electrical power. Kelvin describes the colour appearance of white light. Australian Energy Rating explains the lamp-label terms and asks buyers to consider the purpose and beam direction.

Lumens measure source output; lux measures light arriving per square metreLumens (lm)Lux (lx) on the page
Explanatory diagram. Arrows show direction, not a measured fraction of output.
What to look for on a bulb or lamp specification
SpecificationWhat it tells youBedside question to ask
Lumens (lm)Light output at the stated settingIs it bulb output or complete-fixture output?
Lux (lx)Light arriving per unit areaAt what distance, position and setting was it measured?
Watts (W)Electrical powerIs the actual bulb wattage within the lamp's stated limit?
Kelvin (K)White-light colour appearanceDoes it offer the warm setting I want?
Dimming rangeAvailable output adjustmentHow low can it go, and which control works with it?

The whole lamp matters

Why the same bulb looks different in two lamps.

A shade changes both the amount and direction of escaping light. A pale translucent shade lets light spread through its sides. An opaque shade sends more of the useful light through its openings. Position those openings for the job you want the lamp to do.

YourHome's lighting guide explains that some fittings block or absorb 50% or more of the light. That is a warning about fitting choice, not a measured loss for your shade. Do not halve every lamp's label value and treat the result as page illumination.

Light shade and lamp position change where output travels
Shaded table lamp: some light spreads into the room. Actual distribution depends on the fitting.
A directional head sends light towards the book
Directional head: aim the useful beam at the book. The drawing does not compare measured efficiency.

Check the shade before increasing lumens.

Sit where you normally read. Open your usual book and look for a dark outer edge, a shadow from your hand, or a bright reflection across the page. Move the lamp slightly and compare again. A beam that misses half the book often needs a position change.

Look towards the lamp from your normal pillow position. If you see the exposed bulb, a brighter replacement may make that view more uncomfortable. Choose a fitting that shields the source while still sending light towards the task.

A glossy magazine can reflect a source that is otherwise well placed for a paperback. Tilt the page or adjust the light's direction before increasing brightness. Keep the lamp stable and within the placement clearances in its instructions.

A familiar reference

Use old bulb equivalents carefully.

Energy Rating's table for standard household bulbs maps an old 40 watt tungsten-filament bulb to at least 470 lumens and an old 60 watt bulb to at least 800 lumens from a replacement LED. This gives you a familiar reference if you remember which older bulb worked in your lamp.

Those are replacement-output comparisons. They do not tell you how many watts a modern LED must consume, or what your bedroom needs. Products with the same lumen label can use different electrical power.

The lamp's maximum wattage is still a separate check. Use the LED's actual wattage, correct cap and physical dimensions. Follow any restrictions on bulb type or enclosed use stated by the lamp and bulb manufacturers.

Energy Rating minimum LED replacement outputs for selected old tungsten bulbs15 W old bulb135 lm25 W old bulb245 lm40 W old bulb470 lm60 W old bulb800 lmMinimum replacement LED output
Source: Australian Energy Rating, standard non-directional household lamp table. These are replacement benchmarks, not bedroom requirements.

One lamp, different settings

Give yourself room to turn it down.

A lamp that reads well at full output may be too bright when you put the book away. Compare the lowest setting as carefully as the maximum. A product that says "dimmable" does not necessarily explain how low it goes.

For a replaceable LED bulb, check both the bulb and the lamp's dimmer. YourHome recommends checking compatibility, including a small trial when fitting dimmable LEDs to an existing system. An integrated lamp uses its own controls; follow its manual.

The tool shows simple output arithmetic. It assumes the lamp produces the chosen fraction of its rated maximum. A slider position on a real dimmer may follow a different curve. It does not predict lux, energy use or your eye's response.

Try the lowest setting in the room where you will use it. Check whether it starts there after being switched off, or returns to a brighter default. Easy controls matter when you reach for the lamp from bed.

Explore an output fraction

200 lm assumed output

800 lm × 25% = 200 lm. This is arithmetic, not a calibrated dimmer setting.

Illustrative bedside scene responds to the assumed output fraction200 lm assumed output

Learn the relationship

Explore light arriving on a page.

A lumen label cannot give you a reliable page-light reading by itself. To show why, this explorer lets you choose an assumed fraction of lamp output that reaches a page and the page's illuminated area. It then applies the lux definition.

With the example values, 3% of an 800 lumen source is 24 lumens arriving on a 0.08 square metre area. Dividing 24 by 0.08 gives an average of 300 lux. The 3% is an invented input for the demonstration, not an estimate for a particular lamp or shade.

If you double the area while keeping the arriving lumens fixed, the average falls by half. If more of the lamp's output reaches the page, the average rises. The real fraction depends on the beam, distance, angle and surrounding surfaces.

A real page can have a bright centre and darker edges. An average hides that difference. If you use a light meter, take readings at several points with the book in your usual reading position. Keep the same position when comparing settings.

Use this tool to understand the units. It does not select a lamp, calculate a required bulb, certify compliance or tell you that a light level is suitable for every reader.

Illustrative page-light explorer

300 lx illustrative average

24 lm arriving ÷ 0.08 m² = 300 lx. Arriving fraction and uniform distribution are assumed.

Average illuminance equals arriving lumens divided by illuminated area300 lxillustrative average

Definition: NIST, lux. No lamp measurement is used here.

Test it in place

A quick bedside setup check.

Use the lamp where it will actually sit. A shop display may put the bulb much closer to the surface than your bedside table does. Your pillow position and the height of the table change what you see.

  1. Sit up in bed with the book at its usual height. Start at a comfortable output and adjust the head or position.
  2. Check both pages and the outer corners. Move your hand across them to see whether it casts a troublesome shadow.
  3. Look for the bare bulb and reflections. Adjust the shade or beam so the book stays lit without a bright source in your direct view.
  4. Put the book away and try the low setting. Reach the control without moving the lamp or pulling its cable.

If someone shares the room, check from their side too. A directional reading head gives you more control over where light goes, although reflected light can still spread through the bedroom.

Position the light near the task while shielding the direct sourceCheck from your normal reading position
Positioning illustration. Check your own lamp and follow its instructions.

Specifications in practice

Two lamp examples show why the range matters.

These examples explain the specifications to compare. They are not a tested ranking, and their different light distributions make a simple maximum-lumen comparison incomplete.

Philips Hue Go portable table lamp

Philips' New Zealand specification for the white Go portable table lamp lists 370 lumens at 2700 K. It is a portable table-lamp example with downward light and dimming controls. Check the specification for the exact colour and regional model being sold.

The black model photographs below come directly from an Amazon overseas listing. They show the product's form; they do not establish the brightness of an Australian listing or what its package includes. Choose the table lamp carefully when searching, because the bowl-shaped Go accent light is a different product.

Search this table-lamp model on Amazon AU

Mi Bedside Lamp 2

Xiaomi Australia lists a maximum of 400 lumens and a minimum of 2 lumens in nightlight mode. It also lists a 1700 to 6500 K colour-temperature range. Those figures describe the lamp's output and modes; they do not say how many lux reach a particular book.

Its body spreads light around the room, so compare it with your intended use in mind. A wide output range is useful information when one lamp is meant to provide both a brighter setting and a small glow. LampScout has not verified the minimum setting independently.

Search Mi Bedside Lamp 2 on Amazon AU

Prefer a lamp with a replaceable globe?

A replaceable globe lets you change the output without replacing the whole lamp. Check the cap type and available space inside the shade first. Compare dimmable options only when your lamp's controls support them.

Browse dimmable warm-white bulbs on Amazon AU

Colour and output

Choose a warm appearance, then set the brightness.

A warm-white bulb around 2700 K is a sensible appearance to compare for a bedroom. A warmer colour does not tell you whether the output is low. A high-output warm bulb can still feel bright when it is exposed or close to your face.

Set the brightness for the activity first. When reading ends, reduce the output if you want a quieter room. A convenient control makes that change easier than moving the lamp or relying on a phone every time.

For a colour-changing lamp, check whether its stated maximum applies to a particular white setting. Coloured modes may have different output. Compare the setting you expect to use, and keep colour and brightness separate in the decision.

Colour temperature describes colour appearance, separately from output2700 K4000 K6500 KIllustrative colour strip, not a calibrated display
Illustrative colour appearance. Your screen is not a lamp-colour measurement.

What evening-light research tells us

A Monash-led study by Phillips and colleagues exposed 55 adults aged 18 to 30 to different evening light levels and measured melatonin suppression. It found substantial differences in light sensitivity between participants. It did not establish one ideal bedside bulb output or test these products.

A lumen label cannot predict a person's circadian response. Light reaching the eyes, exposure conditions and individual sensitivity matter. Treat claims that one lamp guarantees better sleep cautiously.

Before you buy

Compare the usable settings.

Start with the lamp you already have if its shape and position work well. A suitable replacement globe may solve the problem. For an integrated lamp, look at the adjustment range and beam before choosing a different product.

Read the listing for the exact model. Product families can contain several lamp shapes, colours and regional versions. A photograph is useful for recognising the product, but it cannot confirm the electrical specifications or everything in the box.

For a rechargeable lamp, check runtime at the output you will use. The longest quoted runtime may apply to a low-output mode. Read the manufacturer's mode details before expecting the same runtime during reading.

Check the return terms before buying a lamp whose minimum output or beam coverage is unclear. Keep its packaging while you compare it in the bedroom. There is no need to accept glare just because the lamp has the desired lumen number.

Check output, control and lamp compatibility before buying

Your bedside checklist

0 of 7 checks complete. Nothing is saved or sent.

Bedside brightness questions

Answers to the common lumen questions.

Is 400 lumens enough for a bedside lamp?

It can be enough for a bedside glow or a well-directed reading setup. A shaded lamp that spreads light widely may put less of that output on your book. Check coverage, source glare and the page in your actual reading position.

Is 800 lumens too bright for a bedside lamp?

It can be too bright at full output for a gentle glow, but it is a useful class of dimmable bulb to compare for a conventional reading lamp. Check the lowest setting and keep the bulb shielded from view.

How many lumens should a bedside reading lamp have?

For a conventional shaded lamp, begin a shopping comparison around 470 to 800 lumens with dimming. This is a starting point, not a prescribed requirement. A directional head can concentrate a smaller output, while a poorly positioned shade may waste much of a larger one.

Are lumens and lux the same?

No. Lumens describe light output; lux describes light arriving per unit area. One lux is one lumen per square metre. You need the arriving light and area to calculate average illuminance.

Does warm white mean the lamp is dim?

No. Warm white describes colour appearance. A 2700 K bulb can produce a large or small lumen output. Compare the output and dimming range separately.

Can I put a dimmable LED into a touch lamp?

Use only a bulb type and dimmer combination supported by the lamp and bulb manufacturers. Some touch lamps have specific requirements. Read the lamp instructions before buying a replacement.

What should I do if the page is dim but the bulb looks bright?

Adjust the position or shade so more useful light reaches the page and the source is shielded. Check for shadows and reflections before increasing the lumen output.

Can a phone measure lux accurately?

Do not assume a phone app is a calibrated light meter. Its readings depend on the device, sensor and software. Use a suitable meter when you need a defensible illuminance measurement, and keep the measurement position consistent.

Sources & specifications

Read the guidance behind the numbers.

  1. Australian Energy Rating: choosing the right lamp. Lamp-label terms and choosing for a purpose.
  2. Australian Energy Rating: comparing lumens to watts. The replacement-output benchmarks shown in the chart.
  3. YourHome: lighting. Task lighting, fitting losses and dimmer compatibility.
  4. NIST: lux. The unit used by the page-light explorer.
  5. Phillips et al.: evening-light sensitivity study. Original research abstract and publication details from Monash University. Publisher DOI.
  6. Xiaomi Australia: Mi Bedside Lamp 2. Manufacturer output and mode specifications.
  7. Philips Hue New Zealand: Go portable table lamp. White regional model specification; confirm the model offered locally.
  8. Amazon AU search: black Philips Hue Go portable table lamp. The photographs were originally sourced from an Amazon Canada listing. This link now opens an Amazon Australia model search; it does not confirm local stock, price or the supplied accessories.

Explore more LampScout lamp guides.